This is a documentation for Board Game Arena: play board games online !

Tips burglebros: Difference between revisions

From Board Game Arena
Jump to navigation Jump to search
(Created page with "Pay attention to the guard and his destination, make sure you are not on his path which is shown on the floor map. If multiple players are on the same floor as you the guard i...")
 
(Major changes: separating into categories, adding lots of tips)
 
(One intermediate revision by one other user not shown)
Line 1: Line 1:
Pay attention to the guard and his destination, make sure you are not on his path which is shown on the floor map. If multiple players are on the same floor as you the guard is going to move in between each players turn. If you are on the first floor and playing with 3 other players and the guard moves 2 tiles after every player you want to be at least 6 tiles away from the guard or get on the next floor as soon as possible to reduce the number of times the guard will move in between player turns.
'''General tips:'''


If a guard is going to find another player try to trigger an alarm that moves the guard away from the player or move to another floor if possible. Spreading players out on different floors slows the guard down.
The only way to lose is to run out of stealth tokens, so they are extremely important. You want in most turns to take the minimum number of risks to keep those stealth.  


Use the patrol deck to know which tiles the guard has already visited if you need somewhere to "hide".
Triggering an alarm is regularly good, you can control where the guard is going.  


Add hack tokens to computer tiles when you discover them because most likely you will be unable to go back and add them later when the guard has increased movement.
When there is multiple players in one floor, you want to be extra safe in a tile where the guard will move rarely to not take the risk to lose 2 or 3 stealth until your next turn.  


Once you locate the safe, make sure all the tiles in the same row and column as the safe are revealed because you cannot crack a safe without those tiles. For example if the safe is in tile B2, then B1, B3, B4, A2, C2, and D2 all need to be revealed in order to be able to crack the safe. You do not need to reveal every tile on a floor if you have located the safe, the tiles needed to crack the safe, and stairs. You may want to reveal tiles if you are looking for computer rooms or another useful room tile.  
Spreading players in differents floors is extremely good since that make the guard move less between each of your turns.  


Playing as the same character multiple times is a good way to learn the character and understand the ability.
By putting your mouse in the patrol deck (top right), you can see which tiles the guard has already visited if you need somewhere to "hide".
 
'''Peek or move:'''
 
Usually, there is two situations for you:
 
Either you are safe, you have no risk to lose a stealth this turn, and few or no risk to lose a stealth next turn. On that case, you usually want to peek at tiles, add hacks in computer, add dices and roll on safe. You could decide to move to unknown tiles during your first two actions.
 
Or either you aren't safe, again two situations: either you have an high chance to lose a stealth, on that case your main goal is usually to find a way to be safe, that can be by drawing an event, moving to unknown tiles even in your third or forth action if you aren't safe, triggering an alarm and going back to where you are, limiting the risk by ending your turn in a safe or mostly safe tile... Or either you have a moderate chance to lose a strealth, and want to limit your risk while still doing something useful.
 
The floor 1 is pretty free (at least in 1 or 2 players) since the guard only move 2 per turn. So taking even a small risk in that floor can be not optimal. It's so free that moving up to floor 2 peek two tiles and going back to floor 1 can often be a good idea.
 
On the opposite, the floor 3 can became really fastly a problem. So taking risk to move to unknown tiles can be a much better idea.
 
If there is any big problem in any floor (deadbolt in the center, fingerprint in entrence of floor...), put full priority on trying to resolve it.
 
If you have more stealth than your teammates you should take more risks. If you have less stealth, you should take less risks.
 
'''Triggering alarms:'''
 
Triggering alarms can often be good.
 
You can trigger an alarm to not make the guard be one away from his destination which will make
 
If the guard is one away from his destination, and you can trigger an alarm three away from him, that will make the increase of movement patrol card be delayed by one move.
 
You can create multiple alarms to be able to decide all or most of it's path during a turn.
 
'''Cracking the safe:'''
 
You usually want to add dices 3 times to a safe. With normal peterman and/or Stethoscope, you want to add only 2.
 
If you add one more, it's to have more control to when you want to crack the safe (or minimise extreme cases). Adding 5 or 6 is useless outside of wasting moves/preparing for later.
 
If there isn't all the tiles in the row and column revealed, rolling has very few utility.
 
When you crack a safe, you increase the movement of all guards in curent and below floor. So you want if possible to crack safe in order.

Latest revision as of 20:30, 11 September 2024

General tips:

The only way to lose is to run out of stealth tokens, so they are extremely important. You want in most turns to take the minimum number of risks to keep those stealth.

Triggering an alarm is regularly good, you can control where the guard is going.

When there is multiple players in one floor, you want to be extra safe in a tile where the guard will move rarely to not take the risk to lose 2 or 3 stealth until your next turn.

Spreading players in differents floors is extremely good since that make the guard move less between each of your turns.

By putting your mouse in the patrol deck (top right), you can see which tiles the guard has already visited if you need somewhere to "hide".

Peek or move:

Usually, there is two situations for you:

Either you are safe, you have no risk to lose a stealth this turn, and few or no risk to lose a stealth next turn. On that case, you usually want to peek at tiles, add hacks in computer, add dices and roll on safe. You could decide to move to unknown tiles during your first two actions.

Or either you aren't safe, again two situations: either you have an high chance to lose a stealth, on that case your main goal is usually to find a way to be safe, that can be by drawing an event, moving to unknown tiles even in your third or forth action if you aren't safe, triggering an alarm and going back to where you are, limiting the risk by ending your turn in a safe or mostly safe tile... Or either you have a moderate chance to lose a strealth, and want to limit your risk while still doing something useful.

The floor 1 is pretty free (at least in 1 or 2 players) since the guard only move 2 per turn. So taking even a small risk in that floor can be not optimal. It's so free that moving up to floor 2 peek two tiles and going back to floor 1 can often be a good idea.

On the opposite, the floor 3 can became really fastly a problem. So taking risk to move to unknown tiles can be a much better idea.

If there is any big problem in any floor (deadbolt in the center, fingerprint in entrence of floor...), put full priority on trying to resolve it.

If you have more stealth than your teammates you should take more risks. If you have less stealth, you should take less risks.

Triggering alarms:

Triggering alarms can often be good.

You can trigger an alarm to not make the guard be one away from his destination which will make

If the guard is one away from his destination, and you can trigger an alarm three away from him, that will make the increase of movement patrol card be delayed by one move.

You can create multiple alarms to be able to decide all or most of it's path during a turn.

Cracking the safe:

You usually want to add dices 3 times to a safe. With normal peterman and/or Stethoscope, you want to add only 2.

If you add one more, it's to have more control to when you want to crack the safe (or minimise extreme cases). Adding 5 or 6 is useless outside of wasting moves/preparing for later.

If there isn't all the tiles in the row and column revealed, rolling has very few utility.

When you crack a safe, you increase the movement of all guards in curent and below floor. So you want if possible to crack safe in order.