For tips on how to play hanabi, see Tips_hanabi
- 1 Introduction
- 2 Card distribution
- 3 Setup
- 4 Game play
- 5 Game end
- 6 Options
- 7 Lingo
- 8 ELO rating
- 9 Cheating
- 10 Conventions
- 10.1 Standard
- 10.2 Finesse
- 10.3 Hat-guessing
- 10.4 Logical Leftism
- 10.5 Closest Friend
- 10.6 Secret convention
- 10.7 Conventional Leftism
- 10.8 Chop-focus
- 11 Strategy
- Hanabi is a cooperative game. Your goal, as a team, is to build a fabulous fireworks show.
- You do this by playing the cards in the correct order.
- However, you cannot see your own cards; you can only see the cards of your team mates.
Final Score Ratings
|0-5||horrible, booed by the crowd...|
|6-10||mediocre, just a spattering of applause.|
|11-15||honourable, but will not be remembered for very long...|
|16-20||excellent, crowd pleasing.|
|21-24||amazing, will be remembered for a very long time!|
|25||legendary, everyone left speechless, stars in their eyes|
- Each card has a colour and a number.
- There are three variants that add a 6th colour: the multicolour.
- There are three difficulties:
- These cards get marked by a separate multicolour clue.
- These cards get marked by a separate multicolour clue.
- These cards get marked by any colour clue.
- 8 clue tokens.
|# Cards (official rules)||5||4||4||4|
|# Cards (unofficial rules)||6||4||4||3|
- Possible when there is at least one clue token available.
- Clues indicate all cards of a certain colour, or all cards of a certain number.
- The active player selects a card in another player's hand.
- The active player selects a clue option.
- One clue token is moved from 'available' to 'used'.
- The active player selects a card in their hand.
- The active player selects the 'Play selected card' button.
- If the played card fits in any of the sequences, it is placed in the appropriate colour stack on the table.
- If the played card does not fit, it is placed in the discard pile and the team gets a misfire token.
- A replacement card is drawn.
- Possible when there are fewer than 8 clue tokens available.
- The active player selects a card in their hand.
- The active player selects the 'Discard selected card' button.
- The discarded card is placed in the discard pile.
- One clue token is moved from 'used' to 'available'.
- A replacement card is drawn.
- The game can end in several ways:
- All cards have been drawn from the deck. After this happens, everybody gets 1 more turn. The game ends with the score at the last turn.
- Your team played all possible cards. In this case, the game ends immediately and you receive the maximum possible score.
- Your team made three mistakes that caused misfires. In this case, you lose the game and get negative ten (-10) points.
- Your team 'abandons' the game. Although discouraged, you receive zero (0) points.
- Clues cannot be given for the colour black.
- Black cards must be played in reverse order, from 5 to 1.
|Black Powder (k)|
After playing the last card of a colour, randomly select one of the following bonuses for immediate use:
- Gain a clue token.
- Gain a clue token and recover a life.
- Give a clue regarding a colour.
- Give a clue regarding a number.
- Shuffle a discarded card into the deck.
- Play a discarded card, if possible.
When you play with others, certain words are used to describe certain objects or situations. Here is a short list.
- A card that is highlighted by a clue.
- A card that is not clued.
- The oldest, unmarked card. The card that you have no information on and will chop from your hand.
- The newest, unmarked card. The card that you have no information on and was freshly drawn.
- To bomb
- A play that causes the third misfire-token. Sometimes called explosion
- A card that has no copy (left) in the deck.
- Double discard
- When consecutive players have the same card on chop. A special problem, since, to each of the consecutive players, a number to chop does not look like a unique save.
- Twin chop
- 2 consecutive players have the same card on chop. Same as Double discard
- Double save
- When a player has two consecutive unique cards, requiring consecutive save clues.
- A set of rules / guidelines / conventions on how to interpret actions by players (including spending of clue-tokens).
- If you are playing with ELO rating on, your ELO may be changed at the end of the game.
- Here is how it works:
- Every player on the team is temporarily considered as having the average ELO rating of the team.
- The system will generate a bot associated with the score your team has achieved (let’s call it Hanabot).
- Your team (actually your team's average ELO) will now compete against Hanabot.
- The system will calculate your team’s ELO gain/loss as though your team had tied with Hanabot.
- If your score is below 18 (50-card game) or below 21 (60-card game), Hanabot's ELO is always 1000.
- You can find all bots' ELO ratings here
- The 55-card variant (50 cards + 1 of each value in the sixth color) cannot be played with ELO rating on.
- This is because this variant is highly dependent on draw and a team’s score may not always reflect the players’ skills.
- If you achieve the perfect score and this should cost you ELO points, you will be considered as having beaten the bot associated with the score, so that you lose no ELO points.
- To be confirmed: I think the ELO-system has had an overhaul.
- Players can cheat at Hanabi by:
- Sharing information via the chat user interface.
- Deliberately abandoning games.
- This is why ranking has been disabled for this game.
- If you want to play "full information" style, meaning that you wait until you know both the colour and number of a card before you play it, you will likely be short on clue tokens in >99% of the decks.
- The logical conclusion is that you cannot play a full information style game and the team must agree on some sort of convention.
- This means a certain amount of meta-information is assigned to clues.
- Many players have different kinds of conventions.
- Note: not all conventions are added to the BGA list. Please respect the convention the table creator wants to play.
- When different players in the same team assign different meta-information to the same clue, the game becomes unplayable.
- Ideally, all players adhere to the convention, to avoid miscommunication.
- Below, the meta-information of several conventions is explained.
- Players assume the following meta-information:
- Every marked card will be playable at some point.
- Can be played when all "number-1" cards are played.
- Saved to be played later on in the game.
- Saved cards are usually played from oldest to newest.
- The newest, previously unmarked card, is the next playable card in the sequence.
- The oldest, unmarked card is safe to discard.
- If a player has a card that they are sure they will never be able to play, e.g. cards marked by a blue clue when the blue stack is already complete, these card must be discarded in priority.
- A clue that marks 0 new cards.
- A clue that tells a lie (i.e. does not conform to the meta-information above).
- A clue that marks unplayable or duplicate cards.
- e.g. Marking 4s in another hand if your hand could have a copy of that 4.
- Sometimes, a "bad" clue cannot be avoided.
- e.g. Save a unique 3 using a number clue which also marks unplayable cards.
- e.g. A colour clue from a flamboyant must be used and it is used to mark 0 new cards.
- When a lie has been told, it needs to be corrected.
- A correction clue can never mean "play", it can only mean "discard".
- Finesse builds on the standard convention (making it a bit more complex).
- In the finesse convention, the timing of the clue gives you extra information.
- You can assume the following meta-information:
- Every card that gets marked, will be playable at some point.
- If the oldest, unmarked card gets marked with a number-clue, then the clue meant "save this/these card(s)". (It is custom to play saved cards from oldest to newest when appropriate.)
- A clue that doesn't mark the oldest card, means that the newest, previously unmarked card, is the next playable card in the sequence.
- The oldest, unmarked card is safe to discard unless that player is busy by having a "known" play.
- If a marked card gets discarded it means:
Meaning of skipping a player / stealing clues in Finesse convention
- There are different approaches among finesse-convention-players about who should clue whom. So this section will be devided into sub-sections. The order does not say anything about which approach is more common on BGA. There are a lot of players following each idea.
- As of now, there is no way of saying which approach is "right" or "better". Of course it is important for success, that in a game, the group of players follows the same idea. If they get mixed, it will most likely result in bombs. If that happens, it does not mean, the other player is "bad" - it merely means, they follow a different idea. So you can only try to find a common ground for the next game or play with another group next time.
- The text within the sections are written by people who follow the idea.
a) Skipping / stealing should be avoided
- If more than 1 person are able to give the same clue, then the last possible person should give that clue.
- In finesse convention skipping (P1 clues P3, instead of P2; then P2 is skipped) means either:
- The skipped player is forbidden from giving that clue; or
- The skipped player has something to play.
b) Skipping / stealing is for discard-management
This style is one way of applying finesse convention. Since the primary assumption is that your CHOP is safe to discard, it might still be that said card is a nice-to-have like a non-unique 2 or 3 that is not yet playable. without knowing your chop card, it is good to handle each-other's chop situation by preferably letting players with definitely useless chop-cards discard rather than discarding your own unknown card. Skipping/stealing is a term that is often used for a situation, where giving a clue is not left for the last possible player to do. For example - player A saves a card on chop of player C, potentially leaving player B without a known play or a useful/necessary clue to give. Skipping players is a useful move give other players the time to play other cards or discard.
When getting skipped without having a play or useful option to clue, it most likely means that your chop card is not very useful. These are valid reasons for skipping you:
- Your chop-card is trash (a copy of the card is already played/marked)
- Your chop-card is redundant: Another copy of it is on another player's (or your own) hand as well
- You might still have something nice on chop, but the player sitting before already received information that their chop might be something very good (from earlier discard-behaviour like NOT being skipped over by the player sitting before them on earlier turns) and they are reluctant to discard for that reason.
- The clue given is a play-clue for a card that might be in your hand so you couldn't know whether you want the other card or not. The player skipping you knows that you want it and therefore takes away the decision.
This approach sacrifices some saving-clue-tokens option (that might be achieved on a stricter dogma about who should clue whom) in order to be able to keep nice cards in the game for longer and discard useless cards instead and by that often get those cards played before they would be discarded.
- This convention is better for players, who play efficient enough to rarely struggle with clue-shortness and can therefore afford being more careful about not losing first copies.
- If a group often struggles with clue-shortness then skipping-dogma (as proposed by other conventions) might as well improve their overall results. If the problem for not achieving 30 points usually isn't clue-shortness but getting bottom-decked (or heavily delayed from losing earlier a card that could be played now), then results can get better with this discard-management convention.
Planning ahead is a vital aspect of the game. By carefully deciding on who to let clue and whom to skip, it is often possible to
- avoid twin-chops before they become an issue
- avoid not having enough clue tokens to save all necessary cards
- get the discard you were waiting for (when a player has 2 copies of the same playable card and you want them to discard before clueing it)
Clues you should avoid giving (bad clues)
- As a special remark: don't mark useless, or duplicate cards. So if you have a saved 4, you are forbidden from marking 4s, unless you are sure you are not holding a copy of that
Special interpretation for play-clues
- When receiving a clue for the "next playable card in the sequence", the linking cards are not limited to already marked cards (like in standard convention).
- The newest, unmarked cards in every player's hand should be considered as well.
- Hanabi Logic ll-vs-cl-the-differences gives some clues, but doesn't explain Conventional Leftism from first principles.
- In addition to the convention(s), there is also some strategy to the game.
- You should not confuse strategy with convention! Strategy is team vs deck; convention is communication within the team.
- A simple example of strategy is saving 2s in 2-player games.
- Using number-2-clue to communicate that those cards need to be saved, is a convention.
- More advanced players will try to avoid losing as many "first" (non-unique) cards as possible.
- It's a good strategy to keep good cards in the game as long as possible - even if they are not yet playable.
- The other copy of that card might be far down the draw pile.
- Trying to mark at least 12 cards with the first 8 clue-tokens.
- This gives 99% chance of always having enough tokens in the game.
- Not using the last two clue-tokens for "single plays".
- This avoids running out of clue-tokens in times when you need to save critical cards.
For strategy tips, see Tips_hanabi