This is a documentation for Board Game Arena: play board games online !

Game interface logic: yourgamename.js: Difference between revisions

From Board Game Arena
Jump to navigation Jump to search
(→‎Actions: added information for the callback_anycase parameter in ajaxcall)
Line 481: Line 481:
===Sliding===
===Sliding===


'''slideToObject(mobile_obj: string | Element, target_obj: string | Element, duration?: number, delay?: number): Animation'''
'''slideToObject(mobile_obj: ElementOrId, target_obj: ElementOrId, duration?: number, delay?: number): Animation'''




Line 503: Line 503:




'''slideToObjectPos(mobile_obj: string | Element, target_obj: string | Element, target_x: number, target_y: number, duration?: number, delay?: number ): Animation'''
'''slideToObjectPos(mobile_obj: ElementOrId, target_obj: ElementOrId, target_x: number, target_y: number, duration?: number, delay?: number ): Animation'''


This method does exactly the same as "slideToObject", except than you can specify some (x,y) coordinates. This way, "mobile_obj" will slide to the specified x,y position relatively to "target_obj".
This method does exactly the same as "slideToObject", except than you can specify some (x,y) coordinates. This way, "mobile_obj" will slide to the specified x,y position relatively to "target_obj".
Line 513: Line 513:




'''slideTemporaryObject( mobile_obj_html: string, mobile_obj_parent: string | Element, from: string  | Element, to: string  | Element, duration?: number, delay?: number ): Animation'''
'''slideTemporaryObject( mobile_obj_html: string, parent: ElementOrId, from: ElementOrId, to: ElementOrId, duration?: number, delay?: number ): Animation'''


This method is useful when you want to slide a temporary HTML object from one place to another. As this object does not exists before the animation and won't remain after, it could be complex to create this object (with dojo.place), to place it at its origin (with placeOnObject) to slide it (with slideToObject) and to make it disappear at the end.
This method is useful when you want to slide a temporary HTML object from one place to another. As this object does not exists before the animation and won't remain after, it could be complex to create this object (with dojo.place), to place it at its origin (with placeOnObject) to slide it (with slideToObject) and to make it disappear at the end.
Line 519: Line 519:
slideTemporaryObject does all of this for you:
slideTemporaryObject does all of this for you:
* mobile_obj_html is a piece of HTML code that represent the object to slide.
* mobile_obj_html is a piece of HTML code that represent the object to slide.
* mobile_obj_parent is the ID of an HTML element of your interface that will be the parent of this temporary HTML object.
* parent is the ID of an HTML element of your interface that will be the parent of this temporary HTML object.
* from is the ID of the origin of the slide.
* from is the ID of the origin of the slide.
* to is the ID of the target of the slide.
* to is the ID of the target of the slide.

Revision as of 20:17, 1 January 2023


Game File Reference



Useful Components

Official

  • Deck: a PHP component to manage cards (deck, hands, picking cards, moving cards, shuffle deck, ...).
  • Draggable: a JS component to manage drag'n'drop actions.
  • Counter: a JS component to manage a counter that can increase/decrease (ex: player's score).
  • ExpandableSection: a JS component to manage a rectangular block of HTML than can be displayed/hidden.
  • Scrollmap: a JS component to manage a scrollable game area (useful when the game area can be infinite. Examples: Saboteur or Takenoko games).
  • Stock: a JS component to manage and display a set of game elements displayed at a position.
  • Zone: a JS component to manage a zone of the board where several game elements can come and leave, but should be well displayed together (See for example: token's places at Can't Stop).

Undocumented component (if somebody knows please help with docs)

  • Wrapper: a JS component to wrap a <div> element around its child, even if these elements are absolute positioned.

Unofficial



Game Development Process



Guides for Common Topics



Miscellaneous Resources

This is the main file for your game interface. Here you will define:

  • Which actions on the page will generate calls to the server.
  • What happens when you get a notification for a change from the server and how it will show in the browser.
  • Setup user interface

File structure

The details of how the file is structured are described below with comments in the code skeleton provided to you.

Here is the basic structure:

  • constructor: here you can define global variables for your whole interface.
  • setup: this method is called when the page is refreshed, and sets up the game interface.
  • onEnteringState: this method is called when entering a new game state. You can use it to customize the view for each game state.
  • onLeavingState: this method is called when leaving a game state.
  • onUpdateActionButtons: called when entering a new state, in order to add action buttons to the status bar.
  • (utility methods): this is where you can define your utility methods.
  • (player's actions): this is where you can write your handlers for player actions on the interface (example: click on an item).
  • setupNotifications: this method associates notifications with notification handlers. For each game notification, you can trigger a javascript method to handle it and update the game interface.
  • (notification handlers): this is where you define the notifications handlers associated with notifications in setupNotifications, above.


More details:

setup(gamedatas: object) This method must set up the game user interface according to current game situation specified in parameters. The method is called each time the game interface is displayed to a player, ie:

  • when the game starts
  • when a player opens a game in the browser later
  • when a player refreshes the game page (F5)
  • when player does a server side Undo

"gamedatas" argument contains all data retrieved by your "getAllDatas" PHP method and some more.


onEnteringState(stateName: string, args: { args: any } | null): void

This method is called each time we enter a new game state. You can use this method to perform some user interface changes at this moment. To access state arguments passed via calling php arg* method use args?.args. Typically you would do something only for active player, using this.isCurrentPlayerActive() check. It is also called (for the current game state only) when doing a browser refresh (after the setup method is called).

Warning: for multipleactiveplayer states: the active players are NOT active yet so you must use onUpdateActionButtons to perform the client side operation which depends on a player active/inactive status. If you are doing initialization of some structures which do not depend on the active player, you can just replace (this.isCurrentPlayerActive()) with (!this.isSpectator) for the main switch in that method.

See more details in Your_game_state_machine:_states.inc.php#Difference_between_Single_active_and_Multi_active_states

onLeavingState(stateName: string): void

This method is called each time we leave a game state. You can use this method to perform some user interface changes at this point (i.e. cleanup).

onUpdateActionButtons(stateName: string, args: object | null): void

In this method you can manage "action buttons" that are displayed in the action status bar and highlight active UI elements. To access state arguments passed via calling php arg* method use args parameter. Note: args can be null! For game states and when you don't supply state args function - it is null. This method is called when the active or multiactive player changes. In a classic "activePlayer" state this method is called before the onEnteringState state. In multipleactiveplayer state it is a mess. The sequencing of calls depends on whether you get into that state from transitions OR from reloading the whole game (i.e. F5).

See more details in Your_game_state_machine:_states.inc.php#Difference_between_Single_active_and_Multi_active_states


Dojo framework

BGA uses the Dojo Javascript framework.

The Dojo framework allows us to do complex things more easily. The BGA framework uses Dojo extensively.

To implement a game, you only need to use a few parts of the Dojo framework. All the Dojo methods you need are described on this page.

Javascript minimization (after July 2020)

For performance reasons, when deploying a game the javascript code is minimized using terser (https://github.com/terser/terser). This minifier works with modern javascript syntax. From your project "Manage game" page, you can now test a minified version of your javascript on the studio (and revert to the original).

NB: it has been reported that there is an issue with this minifier and percentage values for opacity.

Accessing Players Information

player_id: number id of the player who is looking at the game. The player may not be part of the game (i.e. spectator)

 if (notif.args.player_id == this.player_id) {
   ...
 }

isSpectator: boolean Flag set to true if the user at the table is a spectator (not a player).

Example:

    if (this.isSpectator) {
        this.player_color = 'ffffff';
    } else {
        this.player_color = gamedatas.players[this.player_id].color;
    }

Note: If you want to hide an element from spectators, you should use CSS 'spectatorMode' class.

You may consider making a function like this, to detect if the game is in a read-only state (i.e. non-interactive):

 // Returns true for spectators, instant replay (during game), archive mode (after game end)
 isReadOnly: function () {
   return this.isSpectator || typeof g_replayFrom != 'undefined' || g_archive_mode;
 }

gamedatas: object Contains the initial set of data to init the game, created at game start or by game refresh (F5). You can update it as needed to keep an up-to-date reference of the game on the client side if you need it, however most of the time this is unnecessary.

Note: In hotseat mode, the framework does not keep this.gamedatas of hotseat players and shares the same set as the main player to store data.

Note: be careful when you update this data structurally, many framework functions expect data to be certain way and they will break if they see something else.

Typical example of accessing player's info

for (var player_id in this.gamedatas.players) { 
    var playerInfo = this.gamedatas.players [player_id];
    var c = playerInfo.color;
    var name = playerInfo.name;
    // do something 
}

isCurrentPlayerActive(): boolean Returns true if the player on whose browser the code is running is currently active (it's his turn to play). Note: see remarks above about usage of this function inside onEnteringState method.

 if (this.isCurrentPlayerActive()) {

getActivePlayerId(): number Return the ID of the active player, or null if we are not in an "activeplayer" type state.

 if (this.player_id == this.getActivePlayerId()) ...

getActivePlayers(): number[] Return an array with the IDs of players who are currently active (or an empty array if there are none).

Accessing and manipulating the DOM

Element by Id

$(elementId: ElementOrId)

The $ function is used to get an HTML element using its "id" attribute.

Example: modify the content of a "span" element:

In your HTML code:
   <span id="a_value_in_the_game_interface">1234</span>

In your Javascript code:
   $('a_value_in_the_game_interface').innerHTML = "9999";


Note: It is safe to use if you don't know if variable is string (id of element) or element itself, i.e.

  foo: function(card) {
       card = $(card); // now its node, no need to write if (typeof card === 'string') ...
       // but its good idea to check for null here
       ...
  }


getElementById(elementId: string)

Note: $() is the standard method to access some HTML element with the BGA Framework. You can use getElementById but a longer to type and less handy as it does not do some checks.

Style

dojo.style(node: ElementOrId, styleName: string, styleValue: any): void

With dojo.style you can modify the CSS property of any HTML element in your interface.

Examples:

     // Make an element disappear
     dojo.style( 'my_element', 'display', 'none' );

     // Give an element a 2px border
     dojo.style( 'my_element', 'borderWidth', '2px' );

     // Change the background position of an element
     // (very practical when you are using CSS sprites to transform an element to another)
     dojo.style( 'my_element', 'backgroundPosition', '-20px -50px' );

Note: if you have to modify several CSS properties of an element, or if you have a complex CSS transformation to do, you should consider using dojo.addClass/dojo.removeClass (see below).

You can also use object to set multiple values

dojo.setStyle("thinger", {
  "opacity": 0.5,
  "border": "3px solid black",
  "height": "300px"
});

addStyleToClass(cssClassName: string, styleName: string, styleValue: any):void

Same as dojo.style(), but for all the nodes set with the specified cssClassName Equivalent of

 dojo.query(`.${aclass}`).style(styleName, styleValue)
dojo.query("#baz > div").style({
  opacity:0.75,
  fontSize:"13pt"
});

Vanila JS style

 $('my_element').style.display='none'; // set
 var display = $('my_element').style.display; // get
 $('my_element').style.removeProperty('display'); // remove

Classes

dojo.addClass(node: ElementOrId, classes: string): void

dojo.removeClass(node: ElementOrId, classes: string): void

dojo.hasClass(node: ElementOrId, aclass: string): void

dojo.toggleClass(node: ElementOrId, aclass: string): void

In many situations, many small CSS property updates can be replaced by a CSS class change (i.e., you add a CSS class to your element instead of applying all modifications manually).

Advantages are:

  • All your CSS stuff remains in your CSS file.
  • You can add/remove a list of CSS modifications with a simple function and without error.
  • You can test whether you applied the CSS to an element with the dojo.hasClass method.

Example from Reversi:

    // We add "possibleMove" to an element
    dojo.addClass( 'square_'+x+'_'+y, 'possibleMove' );

    // In our CSS file, the class is defined as:
    .possibleMove {
      background-color: white;
      opacity: 0.2;
      filter:alpha(opacity=20); /* For IE8 and earlier */  
      cursor: pointer;  
     }

     // So we've applied 4 CSS property changes in one line of code.

     // ... and when we need to check if a square is a possible move on the client side:
     if( dojo.hasClass( 'square_'+x+'_'+y, 'possibleMove' ) )
     { ... }

     // ... and if we want to remove all possible moves in one line of code (see "dojo.query" method):
     dojo.query( '.possibleMove' ).removeClass( 'possibleMove' );


Vanila JS classList

This is the only exception where dojo versions are better

 // add class
 $(token_id).classList.addClass('possibleMove');
 // remove class
 $(token_id).classList.removeClass('possibleMove');
 // add 2 classes
 const myclasses = ['a','b'];
 $(token_id).classList.addClass(...myclasses);
 // add classes to query result
 document.querySelectorAll(".hand .card").forEach((node)=>node.classList.addClass('possibleMove'));

Attributes

dojo.attr

With dojo.attr you can access or change the value of an attribute or property of any HTML element in your interface.

Exemple:

     // Get the title of a node
     var title = dojo.attr( id, 'title' );
     // Change the height of a node
     dojo.attr( 'img_growing_tree', 'height', 100 );

Vanila JS attr

  $(token).id=new_id; // set attr for "id"
  var id = $(token).id; // get

Queries

dojo.query(cssSelector: string): Element[]

With dojo.query, you can query a bunch of HTML elements with a single function, with a "CSS selector" style.

Example:

     // All elements with class "possibleMove":
     var elements = dojo.query( '.possibleMove' );

     // Count number of tokens (i.e., elements of class "token") on the board (i.e., the element with id "board"):
     dojo.query( '#board .token' ).length;

But what is really cool with dojo.query is that you can combine it with almost all methods above.

Examples:

     // Trigger a method when the mouse enter in any element with class "meeple":
     dojo.query( '.meeple' ).connect( 'onmouseenter', this, 'myMethodToTrigger' );

     // Hide all meeples who are on the board
     dojo.query( '#board .meeple' ).style( 'display', 'none' );

Vanila JS query

 var cards=document.querySelectorAll(".hand .card");// all cards in all hands
 var cards=$('hand').querySelectorAll(".card");// all cards in specific hand
 var card=document.querySelector(".hand .card");// first card or null if none (super handy)

Creating and Destroying elements

dojo.empty(node: ElementOrId)

Remove all children of the node element

  dojo.empty('my_hand');

dojo.destroy(node: ElementOrId)

Remove the element

  dojo.destroy('my_token');
  dojo.query(".green", mynode).forEach(dojo.destroy); // this remove all subnode of class green from mynode

dojo.create(tag: string, attributes?: obj, parent?: ElementOrId): Element

Create element

   dojo.create("div", { class: "yellow_arrow" }, parent); // this creates div with class yellow_array and places it in "parent"


this.format_block(name: string, args: object): string This bga function that takes global var from template file and substitute variables, typical use would be

               var player = gamedatas.players[player_id];
               var div = this.format_block('jstpl_player_board', player ); // var jstpl_player_board = ... is defined in .tpl file 

Note: result is trimmed

this.format_string(name: string, args: object): string This bga function just substitute variables in a string, i.e.

     var div = this.format_string('<div color="${player_color}"></div>', {player_color: '#ff0000'} );

Note: result is trimmed

Note: this can be replaced by using backquoted string now:

    const player_color =  '#ff0000';

const div = `

`;

this.format_string_recursive This bga function is similar to this.format_string but is capable of processing recursive argument structures and translations. It is used to format server notifications.

TODO: find better place for these function docs

Moving elements

dojo.place(node: string | Element, refNode: ElementOrId, pos?: string | number): Element

dojo.place is the best function to insert HTML code somewhere in your game interface without breaking something. It is much better to use than the innerHTML= method if you must insert HTML tags and not only values.

node:

Can be a String or a DOM node. If it is a string starting with “<”, it is assumed to be an HTML fragment, which will be created. Otherwise it is assumed to be an id of a DOM node.

     // Insert your HTML code as a child of a container element
     dojo.place( "<div class='foo'></div>", "your_container_element_id" );

pos:

Optional argument. Can be a number or one of the following strings: “before”, “after”, “replace”, “only”, “first”, or “last”. If omitted, “last” is assumed.

"replace": Replace the container element with my_node element

"first": Places the node as a child of the reference node. The node is placed as the first child.

"last" (default): Places the node as a child of the reference node. The node is placed as the last child.

"before": places the node right before the reference node.

"after": places the node right after the reference node.

"only": replaces all children of the reference node with the node.

positive integer: This parameter can be a positive integer. In this case, the node will be placed as a child of the reference node with this number (counting from 0). If the number is more than number of children, the node will be appended to the reference node making it the last child.

     // Replace all children of container with my_node 
     dojo.place( $('my_node'), "your_container_element_id", "only" );


See also full doc on dojo.place: [1]

Usually, when you want to insert some piece of HTML in your game interface, you should use "Javascript templates".

But you can also relocate elements like that. Note: it won't animate if you do that.


placeOnObject(mobile_obj: ElementOrId, target_obj: ElementOrId): void

places mobile_obj on target_obj, set the absolute positions and centers the mobile_obj on target_obj, effect is immediate

This is not really an animation, but placeOnObject is frequently used before starting an animation.

Example:

  // (We just created an object "my_new_token")

  // Place the new token on current player board
  this.placeOnObject( "my_new_token", "overall_player_board_"+this.player_id );
  
  // Then slide it to its position on the board
  this.slideToObject( "my_new_token", "a_place_on_board" ).play();

placeOnObjectPos( mobile_obj: ElementOrId, target_obj: ElementOrId, target_x: number, target_y: number ): void

This method works exactly like placeOnObject, except than you can specify some (x,y) coordinates (in px). This way, the center of "mobile_obj" will be placed to the specified x,y position relatively to the center of "target_obj".

Note: the placement works differently from this.slideToObjectPos, since coordinates are calculated based on the center of objects.

this.attachToNewParent(mobile_obj: ElementOrId, target_obj: ElementOrId): void

With this method, you change the HTML parent of "mobile_obj" element without moving it. "target_obj" is the new parent of this element. The beauty of attachToNewParent is that the mobile_obj element DOES NOT MOVE during this process.

What happens is that the method calculate a relative position of mobile_obj to make sure it does not move after the HTML parent changes.

Why using this method?

Changing the HTML parent of an element can be useful for the following reasons:

  • When the HTML parent moves, all its child are moving with them. If some game elements is no more linked with a parent HTML object, you may want to attach it to another place.
  • The z_order (vertical order of display) depends on the position in the DOM, so you may need to change the parent of some game elements when they are moving in your game area.

CAREFUL: this function destroys original object and places a clone onto a new parent, this will break all references to this HTML element (ex: dojo.connect). If you need version that does not destroy the object but the same otherwise see BGA_Studio_Cookbook#Attach_to_new_parent_without_destroying_the_object


Animations

Dojo Animations

BGA animations is based on Dojo Animation (see tutorial here).

However, most of the time, you can just use methods below, which are built on top of Dojo Animation.

Note: one interesting method from Dojo that could be useful from time to time is "Dojo.Animation". It allows you to make any CSS property "slide" from one value to another.

Note 2: the slideTo methods are not compatible with CSS transform (scale, zoom, rotate...). If possible, avoid using CSS transform on nodes that are being slided. Eventually, the only possible solution to make these 2 compatible is to disable all CSS transform properties, use slideToObjectPos/placeOnObjectPos, and then apply them again.


Sliding

slideToObject(mobile_obj: ElementOrId, target_obj: ElementOrId, duration?: number, delay?: number): Animation


You can use slideToObject to "slide" an element to a target position.

Sliding element on the game area is the recommended and the most used way to animate your game interface. Using slides allow players to figure out what is happening on the game, as if they were playing with the real boardgame.

The parameters are:

  • mobile_obj: the ID of the object to move. This object must be "relative" or "absolute" positioned.
  • target_obj: the ID of the target object. This object must be "relative" or "absolute" positioned. Note that it is not mandatory that mobile_obj and target_obj have the same size. If their size are different, the system slides the center of mobile_obj to the center of target_obj.
  • duration: (optional) defines the duration in millisecond of the slide. The default is 500 milliseconds.
  • delay: (optional). If you defines a delay, the slide will start only after this delay. This is particularly useful when you want to slide several object from the same position to the same position: you can give a 0ms delay to the first object, a 100ms delay to the second one, a 200ms delay to the third one, ... this way they won't be superposed during the slide.

BE CAREFUL: The method returns an dojo.fx animation, so you can combine it with other animation if you want to. It means that you have to call the "play()" method, otherwise the animation WON'T START.

Example:

   this.slideToObject( "some_token", "some_place_on_board" ).play();


slideToObjectPos(mobile_obj: ElementOrId, target_obj: ElementOrId, target_x: number, target_y: number, duration?: number, delay?: number ): Animation

This method does exactly the same as "slideToObject", except than you can specify some (x,y) coordinates. This way, "mobile_obj" will slide to the specified x,y position relatively to "target_obj".

Example: slide a token to some place on the board, 10 pixels from the top:

   this.slideToObjectPos( "some_token", "some_place_on_board", 0, 10 ).play();


slideTemporaryObject( mobile_obj_html: string, parent: ElementOrId, from: ElementOrId, to: ElementOrId, duration?: number, delay?: number ): Animation

This method is useful when you want to slide a temporary HTML object from one place to another. As this object does not exists before the animation and won't remain after, it could be complex to create this object (with dojo.place), to place it at its origin (with placeOnObject) to slide it (with slideToObject) and to make it disappear at the end.

slideTemporaryObject does all of this for you:

  • mobile_obj_html is a piece of HTML code that represent the object to slide.
  • parent is the ID of an HTML element of your interface that will be the parent of this temporary HTML object.
  • from is the ID of the origin of the slide.
  • to is the ID of the target of the slide.
  • duration/delay works exactly like in "slideToObject"

Example:

this.slideTemporaryObject( '<div class="token_icon"></div>', 'tokens', 'my_origin_div', 'my_target_div' ).play();

Destroy

slideToObjectAndDestroy: function(mobile_obj: string | Element, target_obj: string | Element, duration?: number, delay?: number): void

This method is a handy shortcut to slide an existing HTML object to some place then destroy it upon arrival. It can be used for example to move a victory token or a card from the board to the player panel to show that the player earns it, then destroy it when we don't need to keep it visible on the player panel.

It works the same as this.slideToObject and takes the same arguments, but it starts the animation.

CAREFUL: Make sure nothing is creating the same object at the same time the animation is running, because this will cause some random disappearing effects

Example:

this.slideToObjectAndDestroy( "some_token", "some_place_on_board", 1000, 0 );


fadeOutAndDestroy( node: string | Element, duration?: number, delay?: number):void

This function fade out the target node, then destroy it. Its starts the animation.

  • duration/delay works exactly like in "slideToObject"

Example:

   this.fadeOutAndDestroy( "a_card_that_must_disappear" );

CAREFUL: the HTML node still exists until during few milliseconds, until the fadeOut has been completed. Make sure nothing is creating same object at the same time as animation is running, because you will be some random dissapearing effects

Rotating elements

This example combines "Dojo.Animation" method and a CSS property transform that allow you to rotate the element.

// node is Element we rotating
		    var animation = new dojo.Animation({
			    curve: [fromDegree, toDegree],
			    onAnimate: (v) => {
				    node.style.transform = 'rotate(' + v + 'deg)';
			    } 
		    });
		    
		    animation.play();  

BGA has its own interface to rotate

rotateTo(node: string | Element, degree: number): void

It starts the animation, and stored the rotation degree in the class, so next time you rotate object - it is additive. There is no animation hooks in this one, if you need to change any parameters use dojo animation above.

There is also rotateInstantTo with same signature which does not animate


Animation Callbacks

If you wish to run some code only after an animation has completed you can do this by linking a callback method to 'onEnd'.

var animation_id = this.slideToObject( mobile_obj, target_obj, 500 );
dojo.connect(animation_id, 'onEnd', ()->{
   // do something here
});
animation_id.play();

If you wish to call a second animation after the first (rather than general code) then you can use a dojo animation chain (see tutorial referenced above).

Players input

Connecting

dojo.connect(element: ElementOrId, event: string, context: object, method: eventHandler): any

dojo.connect(element: ElementOrId, event: string, hander: eventHandler): any

Used to associate a player event with one of your notification methods.

Example: associate a click on an element ("my_element") with one of our methods ("onClickOnMyElement"):

      dojo.connect( $('my_element'), 'onclick', this, 'onClickOnMyElement' );

Same idea but base on query (i.e. all element of 'pet' class)

     dojo.query(".pet").connect('onclick', this, 'onPet');

Note: if you need to disconnect the handler you have to store handler returned from this method, i.e.

    var handler = dojo.connect(...);
    ...
    dojo.disconnect(handler);

If you don't store the handler - you have to destroy the object to disconnect it

Typical function that implements the input handler will look like this

onPet: function(event) {
    var id = event.currentTarget.id;
    console.log('onPet ' + id);
    dojo.stopEvent(event);
    if (this.gamedatas.gamestate.name == 'playerTurnPet') {
          this.ajaxcallwrapper('playPet', {card: id});
    } else {
          this.showMoveUnauthorized();
    }
}

connect(element: ElementOrId, event: string, method: eventHandler): void

Used to associate a player event with one of your notification methods.

     this.connect( $('my_element'), 'onclick', 'onClickOnMyElement' );

Or you can use an in-place handler

     this.connect( $('my_element'), 'onclick', (e) => { console.log('boo'); } );

Note that this function stores the connection handler. That is the only real difference between this.connect and dojo.connect. If you plan to destroy the element you connected, you must call this.disconnect() to prevent memory leaks. This function is mainly for permanent objects - if you just want to connect the temp object you should probably not use this method but use dojo.connect which won't require any clean-up.


connectClass(cssClassName: string, event: string, method: eventHandler): void

Same as connect(), but for all the nodes set with the specified cssClassName.

	this.connectClass('pet', 'onclick', 'onPet');

disconnect(element: ElementOrId, event: string): void

Disconnect event handler (previously registered with this.connect or this.connectClass).

  this.disconnect( $('my_element'), 'onclick');

Note: dynamic connect/disconnect is for advanced cases ONLY, you should always connect elements statically if possible, i.e. in setup() method.

disconnectAll()

Disconnect all previously registed event handlers (registered via this.connect or this.connectClass)

 this.disconnectAll();

Actions

this.ajaxcall(url, parameters, obj_callback, callback, callback_anycase?, ajax_method?: string)

This method must be used to send a player input to the game server. It should not be triggered programmatically, especially not in loops, in callbacks, in notifications, or in onEnteringState/onUpdateActionButtons/onLeavingState, in order not to create race conditions or break replay game and tutorial features. It should be used only in reaction to a user action in the interface.

  • url: the url of the action to perform. For a game, it must be: "/<mygame>/<mygame>/myAction.html"
  • parameters: an array of parameter to send to the game server.
    • Note that "lock: true" must always be specified in this list of parameters in order the interface can be locked during the server call. Cannot use lock: false - to not lock it has to be undefined.
    • Note: Restricted parameter names (please don't use them):
      • "action"
      • "module"
      • "class"
  • obj_callback: must be set to "this".
  • callback (non-optional but rarely used): a function to trigger when the server returns result and everything went fine (not used, as all data handling is done via notifications).
  • callback_anycase: (optional) a function to trigger when the server returns ok OR error. If no error this function is called with parameter value false. If an error occurred, the first parameter will be set to true, the second will contain the error message sent by the PHP back-end, and the third will contain an error code.
  • ajax_method: (optional and rarely used) if you need to send large amounts of data (over 2048 bytes), you can set this parameter to 'post' (all lower-case) to send a POST request as opposed to the default GET. This works, but was not officially documented, so only use if you really need to.

Usage:

this.ajaxcall( '/mygame/mygame/myaction.html', { lock: true, 
   arg1: myarg1, 
   arg2: myarg2
}, this, (result)=>{} );

Note: to reduce the boilerplate code you can define your own wrapper, which will do checking, locking and allow to skip parameters, for example

ajaxcallwrapper: function(action, args, handler) {
	if (!args) {
		args = {};
	}
	args.lock = true;

	if (this.checkAction(action)) {
		this.ajaxcall("/" + this.game_name + "/" + this.game_name + "/" + action + ".html", args, this, (result) => { }, handler);
	}
},

This can be called like this which is a lot more compact

   this.ajaxcallwrapper('playDraw');
   this.ajaxcallwrapper('playMove', {card: id})


checkAction(action: string, nomessage?: boolean): boolean

Check if player can do the specified action by taking into account:

  • if interface is locked it will return false and show message "An action is already in progress", unless nomessage set to true
  • if player is not active it will return false and show message "This is not your turn", unless nomessage set to true
  • if action is not in list in possible actions (defined by "possibleaction" in current game state) it will return false and show "This move is not authorized now" error (unconditionally).
  • otherwise returns true


Example:

  function onClickOnGameElement( evt )  {
     if( this.checkAction( "my_action" ) ) {
        // Do the action
     }
  }

checkPossibleActions(action: string): boolean

  • this is independent of the player being active, so can be used instead of this.checkAction(). This is particularly useful for multiplayer states when the player is not active in a 'player may like to change their mind' scenario. Unlike this.checkAction, this function does NOT take interface locking into account
  • if action is not in list in possible actions (defined by "possibleaction" in current game state) it will return false and show "This move is not authorized now" error (unconditionally).
  • otherwise returns true
 function onChangeMyMind( evt )  {
    if( this.checkPossibleActions( "my_action" ) ) {
       // Do the action
    }
 }

checkLock(nomessage?: boolean): boolean

When using "lock: true" in ajax call you can use this function to check if interface is in lock state (it will be locked during server call and notification processing). This check can be used to block some other interactions which do not result in ajaxcall or if you want to suppress errors. Note: normally you only need to use this.checkAction(...), this is for advanced cases.

It will also show error unless nomessage is set to true

 function onChangeMyMind( evt )  {
    if( this.checkLock() ) {
       // Do the action
    }
 }

Notifications

When something happens on the server side, your game interface Javascript logic received a notification.

Here's how you can handle these notifications on the client side.

Subscribe to notifications

dojo.subscribe(notif_type: string, callback_obj: Object, handler: string|handler)

  • notif_type - notification type/name send by php server
  • callback_obj - usually this
  • handler - if string method of callback_obj with name name is called, when notification is called, with notification object as parameter (see below)

Your Javascript "setupNotifications" method is the place where you can subscribe to notifications from your PHP code.

Here's how you associate one of your Javascript method to a notification "playDisc" (from Reversi example):

   setupNotifications: function() {
      ...
      dojo.subscribe('playDisc', this, "notif_playDisc");
   },

Note: the "playDisc" corresponds to the name of the notification you define it in your PHP code, in your "notifyAllPlayers" or "notifyPlayer" method.

Then, you have to define your "notif_playDisc" method:

   notif_playDisc: function(notif) {
     // Remove current possible moves (makes the board more clear)
     dojo.query( '.possibleMove' ).removeClass( 'possibleMove' );          
     this.addDiscOnBoard( notif.args.x, notif.args.y, notif.args.player_id );
   },

In a notification handler like our "notif_playDisc" method, you can access all notifications arguments with "notif.args".

Example:

PHP

    $this->notifyAllPlayers( "apples", clienttranslate('player takes ${count} apples'), [ "count" => 3 ] );

JavaScript

    setupNotifications: function() {
       dojo.subscribe( 'apples', this, 'notif_apples' );
    },

    notif_apples: function(notif) {
      //You can access the "count" like this:
       alert("count = " + notif.args.count);
    }

The notification Object received by client

When sending a notification on your PHP, the client side will receive an Object with the following attributes:

  • type - type of the notification (as passed by php function)
  • log - the log string passed from php notification
  • args - This is the arguments that you passed on your notification method on php
  • bIsTableMsg - is true when you use NotifyAllPlayers method (false otherwise)
  • channelorig - information about table ID (formatted as : "/table/t[TABLE_NUMBER]")
  • gamenameorig - name of the game
  • move_id - ID of the move associated with the notification
  • table_id - ID of the table (comes as string)
  • time - UNIX GMT timestamp
  • uid - unique identifier of the notification
  • h - unknown

Note that those information were inferred from observation on console log. If an Admin can confirm/correct (and remove this line), you're welcome :)

Ignoring notifications

Sometimes you need to ignore some notification on client side. You don't want them to be shown in game log and you don't want them to be handled.

The most common use case is when a player gets private information. They will receive a specific notification (such as "You received Ace of Heart"), while other players would receive more generic notification ("Player received a card").

In X.game.php

        $this->notifyAllPlayers("dealCard", clienttranslate('${player_name} received a card'), [
            'player_id' => $playerId,
            'player_name' => $this->getActivePlayerName()
        ]);

        $this->notifyPlayer($playerId, "dealCardPrivate", clienttranslate('You received ${cardName}'), [
            "type" => $card["type"],
            "cardName" => $this->getCardName($card["type"])
        ]);

The problem with this approach is that the active player will receive two notifications:

  • Player1 received a card
  • You received Ace of Hearts

Hence, notification ignoring.

NOTE: You can think that it would be possible to send such notification to all players except active just by using notifyPlayer and it seems to work. The problem however is that table spectators would miss such notification and their user interface (and game log) wouldn't be updated. Since there is no way to send notification just to spectators, ignoring the notification (or "filtering") is the only reasonable solution.

setIgnoreNotificationCheck(notif_type: string, predicate: ((notif: Notif)=>boolean)) This method will set a check whether any of notifications of specific type should be ignored.

The parameters are:

  • notif_type: type of the notification
  • predicate (notif => boolean): a function that will receive notif object and will return true if this specific notification should be ignored

Before dispatching any notification of this type, the framework will call predicate to check whether notification should be ignored, if it return true - the notification will be dispatched, i.e. logged or handled.

    this.notifqueue.setIgnoreNotificationCheck( 'dealCard', (notif) => (notif.args.player_id == this.player_id) );


IMPORTANT: Remember that this notification is ignored on the client side, but was still received by the client. Therefore it shouldn't contain any private information as cheaters can get it. In other words this is not a way to hide information.

IMPORTANT: When a game is reloaded with F5 or when opening a turn based game, old notifications are replayed as history notification. They are used just to update the game log and are stripped of all arguments except player_id, i18n and any argument present in message. If you use and other argument in your predicate you should preserve it as explained here.

Synchronous notifications

When several notifications are received by your game interface, these notifications are processed immediately, one after the other, in the same exact order they have been generated in your PHP game logic.

However, sometimes, you need to give some time to the players to figure out what happened on the game before jumping to the next notification. Indeed, in many games, there are a lot of automatic actions, and the computer is going to resolve all these actions very fast if you don't tell it not to do so.

As an example, for Reversi, when someone is playing a disc, we want to wait 500 milliseconds before doing anything else in order the opponent player can figure out what move has been played.

Here's how we do this, right after our subscription:

    dojo.subscribe( 'playDisc', this, "notif_playDisc" );
    this.notifqueue.setSynchronous( 'playDisc', 500 );   // Wait 500 milliseconds after executing the playDisc handler

It is also possible to control the delay timing dynamically (e.g., using notification args). As an example, maybe your notification 'cardPlayed' should pause for a different amount of time depending on the number or type of cards played.

For this case, use setSynchronous without specifying the duration and use setSynchronousDuration within the notification callback.

  • NOTE: If you forget to invoke setSynchronousDuration, the game will remain paused forever!
setupNotifications: function () {
    dojo.subscribe( 'cardPlayed', this, 'notif_cardPlayed' );
    this.notifqueue.setSynchronous( 'cardPlayed' ); // wait time is dynamic
    ...
},

notif_cardPlayed: function (notif) {
    // MUST call setSynchronousDuration

    // Example 1: From notification args (PHP)
    this.notifqueue.setSynchronousDuration(notif.args.duration);
    ...

    // Or, example 2: Match the duration to a Dojo animation
    var anim = dojo.fx.combine([
        ...
    ]);
    anim.play();
    this.notifqueue.setSynchronousDuration(anim.duration);
},

WARNING: combining synchronous and ignored notifications You must be careful when combining dynamic synchronous durations (as described above) with ignored notifications. If you have a conditionally ignored notification like this (see below section):

this.notifqueue.setIgnoreNotificationCheck( 'myNotif', (notif) => (notif.args.player_id == this.player_id) /* or any other condition */ )

then you CANNOT do

this.notifqueue.setSynchronous('myNotif');

as, when the ignored check passes, the notification handler, in which `this.notifqueue.setSychronousDuration` is called, is never called and so the duration is never set and interface locking results.

The workaround is to set a "dummy" time:

this.notifqueue.setSynchronous('myNotif', 5000);

whose value is irrelevant but must be large enough to cover the time before the notification handler is called. The large value never actually comes into play because the notification is either ignored, or the synchronous duration is reset to a sensible value inside the handler.


Pre-defined notification types

tableWindow - This defines notification to display Scoring Dialogs, see below.

message - This defines notification that shows on players log and have no other effect (technically any unhandled notification will do the same but its recommended to use this keyword for consistency)

  // You can call this on php side without doing anything on client side
   self::notifyAllPlayers( 'message', clienttranslate('hello'), [] );


simplePause - This notification will just delay other notifications, maybe useful if you know you need some extra time for animation or something. Requires a time parameter.

    self::notifyAllPlayers( 'simplePause', '', [ 'time' => 500] ); // time is in milliseconds

Note: the following types are RESERVED by framework, do not use:

gameStateChange gameStateChangePrivateArg gameStateMultipleActiveUpdate newActivePlayer playerstatus yourturnack clockalert tableInfosChanged playerEliminated tableDecision archivewaitingdelay end_archivewaitingdelay replaywaitingdelay end_replaywaitingdelay replayinitialwaitingdelay end_replayinitialwaitingdelay aiPlayerWaitingDelay replay_has_ended updateSpectatorList wouldlikethink updateReflexionTime undoRestorePoint resetInterfaceWithAllDatas zombieModeFail zombieModeFailWarning aiError skipTurnOfPlayer zombieBack allPlayersAreZombie gameResultNeutralized playerConcedeGame showTutorial showCursor showCursorClick skipTurnOfPlayerWarning banFromTable resultsAvailable switchToTurnbased newPrivateState infomsg

Tooltips

Adding static tooltips

addTooltip( nodeId:string, helpStringTranslated: string, actionStringTranslated:string, delay?:number):void

Add a simple text tooltip to the DOM node.

Specify 'helpStringTranslated' to display some information about "what is this game element?". Specify 'actionStringTranslated' to display some information about "what happens when I click on this element?".

You must specify both of the strings. You can only use one and specify an empty string () for the other one.

When you pass text directly function _() must be used for the text to be marked for translation! Except for empty string.

Parameter "delay" is optional. It is primarily used to specify a zero delay for some game element when the tooltip gives really important information for the game - but remember: no essential information must be placed in tooltips as they won't be displayed in some browsers (see Guidelines).

Example:

   this.addTooltip( 'cardcount', _('Number of cards in hand'), '' );

Note: this generates static tooltip and attaches to existing dom element, if you need to generate tooltip more dynamically you have to call that method every time information about object is updated or use completely different tehnique, see dynamic tooltips below.

addTooltipHtml( nodeId: string, html: string, delay?:number ):void

Add an HTML tooltip to the DOM node (for more elaborate content such as presenting a bigger version of a card).

addTooltipToClass(cssClass: string, helpStringTranslated: string, actionStringTranslated: string, delay?:number ):void;

Add a simple text tooltip to all the DOM nodes set with this cssClass. See more details above for this.addTooltip.

    this.addTooltipToClass( 'meeple', _('This is A Meeple'), _('Click to tickle') );

IMPORTANT: all concerned nodes must exist and have IDs to get tooltips.

addTooltipHtmlToClass(cssClass: string, html: string, delay?:number ):void)

Add an HTML tooltip to to all the DOM nodes set with this cssClass (for more elaborate content such as presenting a bigger version of a card).

IMPORTANT: all concerned nodes must exist and have IDs to get tooltips.

Removing static tooltips

removeTooltip( nodeId: string ):void

Remove a tooltip from the DOM node with given id.

Advanced tooltips

force tooltip to open

If you want to force tooltip to open in reaction to some other action, i.e. click you can do this

  this.tooltips[id].open(id)

where id is the id of the tooltip node where tooltip was installed.

dynamic tooltips

See BGA_Studio_Cookbook#Dynamic_tooltips

tooltips on mobile

Tooltips is very unreliable on mobile, it is recommended to implement some other method to obtaining same information, such as simple click handler in dedicated "Help" mode or provide dedicated clickable areas such as corner of card.

Warning messages

Sometimes, there is something important that is happening in the game and you have to make sure all players get the message. Most of the time, the evolution of the game situation or the game log is enough, but sometimes you need something more visible.

Ex: someone fulfills one of the end of the game conditions, so this is the last turn.

showMessage(msg: string, type: string): void

showMessage shows a message in a big rectangular area on the top of the screen of the current player, and it dissapears after few seconds (also it will be in the log in some cases).

  • "msg" is the string to display. It should be translated.
  • "type" can be set to "info", "error", "only_to_log" or custom string. If set to "info", the message will be an informative message on a white background. If set to "error", the message will be an error message on a red background and it will be added to log. If set to "only_to_log", the message will be added to the game log but will not popup at the top of the screen.

If set to custom string, it will be transparent, to use custom type define "head_xxx" in css, where xxx is the type. For example if you want yellow warning, use "warning" as type and add this to css:

.head_warning {
   background-color: #e6c66e;
}

Important: the normal way to inform players about the progression of the game is the game log. The "showMessage" is intrusive and should not be used often.

    notif_messageinfo: function(notif) {
	if (!g_archive_mode) {
        	var message = this.format_string_recursive(notif.log, notif.args);
		this.showMessage(_('Announcement:') + " " + message, 'info');		
         }
    },

Show message could be used on the client side to prevent user wrong moves before it is send to server. Example from 'battleship':

onGrid: function(event) {
     if (checkIfPlayerTriesToFireOnThemselves(event)) {
        this.showMessage(_('This is your own board silly!'), 'error');
        return;
     }
     ...
},

showMoveUnauthorized(): void

Shows predefined user error that move is unauthorized now

onPet: function(event) {
     if (checkPet(event)==false) {
        this.showMoveUnauthorized();
        return;
     }
     ...
},

Dialogs

Confirmation dialog

When an important action with a lot of consequences is triggered by the player, you may want to propose a confirmation dialog.

CAREFUL: the general guideline of BGA is to AVOID the use of confirmation dialogs. Confirmation dialogs slow down the game and bother players. The players know that they have to pay attention to each move when they are playing online.

The situations where you should use a confirmation dialog are the following:

  • It must not happen very often during a game.
  • It must be linked to an action that can really "kill a game" if the player does not pay attention.
  • It must be something that can be done by mistake (ex: a link on the action status bar).

confirmationDialog(message:string, yesHandler:(param:any)=>void, noHandler?:(param:any)=>void, param?: any): void

  • message - message will be shown to user, use _() to translate
  • yesHandler - non-optional handler to be called on yes
  • noHandler - optional handler to called on no
  • param - if specified, it will be passed to both handlers

NOTE: this is async function, it does not return anything and you should not do anything after, you must do everything in handlers

How to display a confirmation dialog:

    this.confirmationDialog(_("Are you sure you want to bake the pie?"), () => {
      this.bakeThePie();
    });
    return; // nothing should be called or done after calling this, all action must be done in the handler

Multiple choice dialog

You can use this dialog to give user a choice with small amount of options

multipleChoiceDialog(message: string, choices: string[], callback: (choice: number)=>void): void

  • message - message will be shown to user, use _() to translate
  • choices - array of choices
  • callback - non-optional handler to be called on choice made, the choice parameter is the INDEX of the choice from the array of choices

NOTE: this is async function, it does not return anything and you should not do anything after, you must do everything in handlers NOTE: there is no cancel handler, so make sure you gave user a choice to get out of it

Example:

    const keys = ["0", "1", "5", "10"];
    this.multipleChoiceDialog(_("How many bugs to fix?"), keys, (choice) => {
      if (choice==0) return; // cancel operation, do not call server action
      var bugchoice = keys[choice]; // choice will be 0,1,2,3 here
      this.ajaxcallwrapper("fixBugs", { number: bugchoice });
    });
    return; // must return here

Generic Dialogs

As a general rule, you shouldn't use dialogs windows.

BGA guidelines specify that all game elements should be displayed on the main screen. Players can eventually scroll down to see game elements they don't need to see anytime, and you may eventually create anchors to move between game area section. Of course dialogs windows are very practical, but the thing is: all players know how to scroll down, and not all players know how to show up your dialog window. In addition, when the dialog shows up, players can't access the other game components.

Sometimes although, you need to display a dialog window. Here is how you do this:

 // Create the new dialog over the play zone. You should store the handler in a member variable to access it later
 this.myDlg = new ebg.popindialog();
 this.myDlg.create( 'myDialogUniqueId' );
 this.myDlg.setTitle( _("my dialog title to translate") );
 this.myDlg.setMaxWidth( 500 ); // Optional
 
 // Create the HTML of my dialog. 
 // The best practice here is to use Javascript templates
 var html = this.format_block( 'jstpl_myDialogTemplate', { 
               arg1: myArg1,
               arg2: myArg2,
               ...
           } );  
 
 // Show the dialog
 this.myDlg.setContent( html ); // Must be set before calling show() so that the size of the content is defined before positioning the dialog
 this.myDlg.show();
 
 // Now that the dialog has been displayed, you can connect your method to some dialog elements
 // Example, if you have an "OK" button in the HTML of your dialog:
 dojo.connect($('my_ok_button'), 'onclick', this, (event) => {
               event.preventDefault();
               this.myDlg.destroy();
           });

If necessary, you can remove the default top right corner 'close' icon, or replace the function called when it is clicked:

 // Removes the default close icon
 this.myDlg.hideCloseIcon();
 // Replace the function call when it's clicked
 this.myDlg.replaceCloseCallback((event) => { ... });

Scoring dialogs

Sometimes at the end of a round you want to display a big table that details the points wins in each section of the game.

Example: in Hearts game, we display at the end of each round the number of "heart" cards collected by each player, the player who collected the Queen of Spades, and the total number of points loose by each player.

Scoring dialogs are managed entirely on PHP side, but they are described here as their effects are visible only on client side.

Displaying a scoring dialog is quite simple and is using a special notification type: "tableWindow":

  // on PHP side:
  $this->notifyAllPlayers( "tableWindow", '', array(
            "id" => 'finalScoring',
            "title" => clienttranslate("Title of the scoring dialog"),
            "table" => $table
        )); 

The "table" argument is a 2 dimensional PHP array that describes the table you want to display, line by line and column by column.

Example: display an 3x3 array of strings

   $table = [
      [ "one", "two", "three" ],    // This is my first line
      [ "four", "five", "six" ],    // This is my second line
      [ "seven", "height", "nine" ]    // This is my third line
   ];

As you can see above, in each "cell" of your array you can display a simple string value. But you can also display a complex value with a template and associated arguments like this:

   $table = [
      [ "one", "two", [ "str" => clienttranslate("a string with an ${argument}"), "args" => [ 'argument' => 'argument_value' ] ] ],
      [ "four", "five", "six" ], 
      [ "seven", "height", "nine" ]
   ];

This is especially useful when you want to display player names with colors. Example from "Hearts":

        $firstRow = [ '' ];
        foreach( $players as $player_id => $player )    {
            $cell = [ 'str' => '${player_name}',
                      'args' => [ 'player_name' => $player['player_name'] ],
                      'type' => 'header'
                    ];
            $firstRow[] = $cell;
        }
        $table[] = $firstRow;
        ...

You can also use three extra attributes in the parameter array for the notification:

  • header: the content for this parameter displays before the table (also, the html will be parsed and player names will be colored according to the current game colors).
  • footer: the content for this parameter displays after the table (no parsing for coloring the player names)
  • closing: if this parameter is used, a button will be displayed with this label at the bottom of the popup and will allow players to close it (more easily than by clicking the top right 'cross' icon).
   $this->notifyAllPlayers( "tableWindow", '', [
            "id" => 'finalScoring',
            "title" => clienttranslate("Title of the scoring dialog"),
            "table" => $table,
            "header" => ['str' => clienttranslate('Table header with parameter ${number}'),
                                 'args' => [ 'number' => 3 ],
                               ],
            "footer" => '<div class="myfoot"></div>',
            "closing" => clienttranslate( "Closing button label" )
        ] ); 

Note: currently id is not used - so you cannot access resulting div by id on js side Note: any traslatable stirng have to be wrapped by clienttranslate() on top level OR it has to be recursive template.

DO NOT DO THIS:

   "footer" => '<div>'.clienttranslate( "The end" ).'</div>', // this will not work for translations!!!

Scoring animated display

Sometimes, you may want to display a score value over an element to make the scoring easier to follow for the players (Terra Mystica final scoring for example). You can do it with:

displayScoring(anchor_id:string, color:string, score:number|string, duration?:number, offset_x?:number, offset_y?: number): void


anchor_id: ID of the html element to place the animated score onto (without the '#')

color: hexadecimal RGB representation of the color (should be the color of the scoring player), but without a leading '#'. For instance, 'ff0000' for red.

score: numeric score to display, prefixed by a '+' or '-'

duration: animation duration in milliseconds (optional, default is 1000)

offset_x and offset_y: if both offset_x and offset_y are defined and not null, apply the following offset (in pixels) to the scoring animation. Note that the score is centered in the anchor, so the offsets might have to be negative if you calculate the position.


Note: if you want to display successively each score, you can use this.notifqueue.setSynchronous() function.

    setupNotifications: function()   {
           dojo.subscribe( 'displayScoring', this, "notif_displayScoring" );
           ...
    }
...

    notif_displayScoring: function(notif) {
            const duration = notif.args.duration?notif.args.duration:1000;
            this.notifqueue.setSynchronous('displayScoring', duration );
	    this.displayScoring( notif.args.target, notif.args.color, notif.args.score, duration);
    },

Speech bubble

For better interactivity in some games (Love Letter for example), you may use comic book style speech bubbles to express the players voices. This is done with showBubble:

showBubble(anchor_id: string, text: string, delay?: number, duration?: number, custom_class?: string): void

  • anchor_id - where to attach the bubble
  • text - what to put in bubble, can be html
  • delay - delay in milliseconds (optional, default 0)
  • duration - duration of animation in milliseconds (optional, default 3000)
  • custom_class - extra class to add to bubble (optional), if you need to override the default bubble style
   this.showBubble('meeple_2', _('Hello'), 0, 1000, 'pink_bubble');
  notif_speechBubble(notif) {
    var html = this.format_string_recursive(notif.args.text, notif.args.args);
    this.showBubble(notif.args.target, html, notif.args.delay ?? 0, notif.args.duration ?? 1000);
  },

Warning: if your bubble could overlap other active elements of the interface (buttons in particular), as it stays in place even after disappearing, you should use a custom class to give it the style "pointer-events: none;" in order to intercept click events.

Note: If you want this visually, but want to take complete control over this bubble and its animation (for example to make it permanent) you can just use div with 'discussion_bubble' class on it, and content of div is what will be shown.

Translations

See Translations

Players panels

Update players score

The column player_score from the player table is automatically loaded into this.scoreCtrl and therefore into the stars location on the player board. This occurs sometime after the game setup() function. However this score must be updated as the game progresses using notifications.


Note: this.scoreCtrl[player_id] is object of class Counter, you can use other counter API.

Increase a player score (with a positive or negative number):

  this.scoreCtrl[ player_id ].incValue( score_delta );

Set a player score to a specific value:

  this.scoreCtrl[ player_id ].setValue( new_score );

Set a player score to a specific value with animation:

  this.scoreCtrl[ player_id ].toValue( new_score );

Typical usage would be (that will process 'score' notification):

        setupNotifications : function() {
              ...
             dojo.subscribe('score', this, "notif_score");
        },
        notif_score: function(notif) {
            this.scoreCtrl[notif.args.player_id].setValue(notif.args.player_score);
        },

Adding stuff to player's panel

At first, create a new "JS template" string in your template (tpl) file:

(from Gomoku example)

var jstpl_player_board = '\<div class="cp_board">\
    <div id="stoneicon_p${id}" class="gmk_stoneicon gmk_stoneicon_${color}"></div><span id="stonecount_p${id}">0</span>\
</div>';

Then, you add this piece of code in your JS file to add this template to each player panel:

            // Setting up player boards
            for( var player_id in gamedatas.players )
            {
                var player = gamedatas.players[player_id];
                         
                // Setting up players boards if needed
                var player_board_div = $('player_board_'+player_id);
                dojo.place( this.format_block('jstpl_player_board', player ), player_board_div );
            }

(Note: the code above is of course from your "setup" function in your Javascript).

Very often, you have to distinguish current player and others players. In this case, you just have to create another JS template (ex: jstpl_otherplayer_board) and use it when "player_id" is different than "this.player_id".

Player's panel disabling/enabling

disablePlayerPanel(player_id: number):void

Disable given player panel (the panel background become gray).

Usually, this is used to signal that this played passes, or will be inactive during a while.

Note that the only effect of this is visual. There are no consequences on the behaviour of the panel itself.

enablePlayerPanel(player_id:number):void

Enable a player panel that has been disabled before.

enableAllPlayerPanels():void

Enable all player panels that has been disabled before.

Player order

updatePlayerOrdering():void

This function makes sure that player order in player's panel matches this.gamedatas.playerorder and its normally called by framework. You can call it yoursel if you change this.gamedatas.playerorder from notification. Also you can override this function to change defaults OR insert a non-player panel BGA_Studio_Cookbook#Inserting_non-player_panel.


Counters

Note: there is bga component called "ebg/counter" this API is not using it, these methods below declared right in core game. If you need animation for counters use ebg/counter

To use this API just create a counter dom element like this (class does not really matter)

 <div class="counter" id="bread"></div>
 <div class="counter" id="coin"></div>

The "bread" will the counter name.

The php code should send all "counters" data from getAllDatas() method like this

game.php

  protected function getAllDatas() {
    // (the key must match counter_name)
    $result['counters']=[
        'bread' => [ 
         'counter_name' => 'bread', 
         'counter_value' => 3
         ], 
        'coin' => [
          'counter_name' => 'coin', 
          'counter_value' => 5
        ]
   ];
   return $result;
  }

setCounter(counter_name:stirng, new_value: string | number): void

updates the global this.gamedatas.counters and value of node $(counter_name)

  notif_counter: function(notif) { 
    this.setCounter(notif.args.counter_name, notif.args.counter_value);
  },

incCounter(counter_name:string, delta: number): void

  notif_counter : function(notif) {
    this.incCounter(notif.args.counter_name, notif.args.inc);
  },

updateCounters(counters: object): void

Useful for updating game counters in the player panel (such as resources). 'counters' arg is map of counters (the key must match counter_name)

 {
   'bread': { 
        'counter_name' : 'bread', 
        'counter_value' => 3
   }, 
   'coin': { 
        'counter_name' : 'coin', 
        'counter_value' => 5
   }
 }

All counters MUST be referenced in this.gamedatas.counters (means they should be send from php) and will be updated. DOM objects referenced by 'counter_name' will have their innerHTML updated with 'counter_value'.

Usually you call this from notification

                        notif_counter : function(notif) {
                            this.updateCounters(notif.args.counters);
                        },

BGA GUI components

BGA framework provides some useful ready-to-use components for the game interface:

Studio#BGA_Studio_game_components_reference

Note that each time you are using an additional component, you must declare it at the top of your Javascript file in the list of modules used.

Example if you are using "ebg.stock":

define([
    "dojo","dojo/_base/declare",
    "ebg/core/gamegui",
    "ebg/counter",
    "ebg/stock"  /// <=== we are using ebg.stock module
],

BGA Buttons

Basic Button

addActionButton( id: string, label: string, method: string | eventhandler, destination?: string, blinking?: boolean, color?:string): void

You can use this method to add an action button in the main action status bar (or other places).

Arguments:

  • id: an element ID that should be unique in your HTML DOM document.
  • label: the text of the button. Should be translatable (use _() function). Note: this can also be any html, such as "
    ", see example below on how to make image action buttons.
  • method: the name of your method that must be triggered when the player clicks on this button (can be name of the method on game class or handler).
  • destination (optional): id of parent on where to add button, ONLY use in rare cases if location is not action bar. Use null as value if you need to specify other arguments.
  • blinking (optional): if set to true, the button is going blink to catch player's attention. Please DO NOT abuse blinking button. If you need button to blink after some time passed add class 'blinking' to the button later.
  • color: could be blue (default), red,gray or none.

You should only use this method in your "onUpdateActionButtons" method. Usually, you use it like this:

        onUpdateActionButtons: function( stateName, args ) {                      
            if (this.isCurrentPlayerActive()) {            
                switch( stateName ) {
                case 'giveCards':
                    this.addActionButton( 'giveCards_button', _('Give selected cards'), 'onGiveCards' ); 
                    this.addActionButton( 'pass_button', _('Pass'), ()=>this.ajaxcallwrapper('pass') ); 
                    break;
                }
            }
        },   

In the example above, we are adding a "Give selected cards" button in the case we are on game state "giveCards". When player clicks on this button, it triggers our "onGiveCards" method.

Example using blinking red button:

    this.addActionButton( 'button_confirm', _('Confirm?'), 'onConfirm', null, true, 'red'); 

If you want to call the handled with arguments, you can use arrow functions, like this:

     this.addActionButton( 'commit_button', _('Confirm'), () => this.onConfirm(this.selectedCardId), null, false, 'red'); 

Image Button

You can use the same method, but add extra class to a button to disable the padding and style it, i.e.

this.addActionButton( 'button_brick', '<div class="brick"></div>', ()=>{... on brick ...}, null, null, 'gray'); 
dojo.addClass('button_brick','bgaimagebutton');

where

.bgaimagebutton {
  padding: 0px 12px;
  min-height: 28px;
  border: none;
}

If you use this a lot, you can define a helper function, i.e.

/**
 * This method can be used instead of addActionButton, to add a button which is an image (i.e. resource). Can be useful when player
 * need to make a choice of resources or tokens.
 */
addImageActionButton: function(id, div, handler, bcolor, tooltip) {
	if (typeof bcolor == "undefined") {
		bcolor = "gray";
	}
	// this will actually make a transparent button id color = gray
	this.addActionButton(id, div, handler, null, false, bcolor);
	// remove border, for images it better without
	dojo.style(id, "border", "none");
	// but add shadow style (box-shadow, see css)
	dojo.addClass(id, "shadow bgaimagebutton");
	// you can also add additional styles, such as background
	if (tooltip) {
		dojo.attr(id, "title", tooltip);
	}
	return $(id);
},

Disabling Button

You can disable the bgabutton by adding the css class disabled in you js. The disabled button is still visible but is grey and not clickable. For example in the onUpdateActionButtons :

this.addActionButton('play_button_id', _('Play 1 to 3 cards'), 'playFunctionButton'); 
if (condition) {
  dojo.addClass('play_button_id', 'disabled');
}


Custom Buttons

You can create a custom button, but the BGA framework provides a standard button that requires only .css classes: bgabutton and bgabutton_${color}.

Examples:

<a href="#" id="my_button_id" class="bgabutton bgabutton_blue"><span>My blue button</span></a>

<a href="#" id="my_button_id" class="bgabutton bgabutton_red bgabutton_big"><span>My big red button</span></a>


Note: To see it in action, check out Coloretto.

Button outside of action bar

Use addActionButton() method with destination argument set

this.addActionButton( 'commit_button', _('Confirm'), 'onConfirm', 'player_board', true, 'red'); 

in example above the button will be place on object with id 'player_board'

Image loading

See also Game_art:_img_directory.

Be careful: by default, ALL images of your img directory are loaded on a player's browser when he loads the game. For this reason, don't let in your img directory images that are not useful, otherwise it's going to slowdown the game load.

dontPreloadImage(image_file_name: string)

Using dontPreloadImage, you tell the interface to not preload a specific image in your img directory.

Example of use:

this.dontPreloadImage( 'cards.png' );

This is particularly useful if for example you have 2 different themes for a game. To accelerate the loading of the game, you can specify to not preload images corresponding to the other theme.

Another example of use: in "Gosu" game with Kamakor extension, you play with 5 sets of cards among 10 available. Cards images are organized by sets, and we only preload the images corresponding to the 5 current sets with ensureSpecificGameImageLoading( image_file_names_array ).

// By default, do not preload anything
this.dontPreloadImage( 'cards.png' );
this.dontPreloadImage( 'clan1.png' );
this.dontPreloadImage( 'clan2.png' );
this.dontPreloadImage( 'clan3.png' );
this.dontPreloadImage( 'clan4.png' );
this.dontPreloadImage( 'clan5.png' );
this.dontPreloadImage( 'clan6.png' );
this.dontPreloadImage( 'clan7.png' );
this.dontPreloadImage( 'clan8.png' );
this.dontPreloadImage( 'clan9.png' );
this.dontPreloadImage( 'clan10.png' );
var to_preload = [];
for( i in this.gamedatas.clans )
{
	var clan_id = this.gamedatas.clans[i];
	to_preload.push( 'clan'+clan_id+'.png' );
}


this.ensureSpecificGameImageLoading( to_preload );

Note: You don't need to specify to not preload game box images (game_box.png, game_box75.png...) since they are not preloaded by default.

ensureSpecificGameImageLoading(list: string[])

This is oppostive of dontPreloadImage - its ensure specific images is loaded. Note: only makes sense if preload list is empty, otherwise everything is loaded anyway


load specific images All images that will be preloaded stored in g_img_preload. If you want to override it directly - there is no API, but you can do this in GAME constructor

         g_img_preload = ['tokens.png', 'trains.png', 'loc_plan.png', 'eng.png', 'eng-back.png'];

You can also set it to empty array and call ensureSpecificGameImageLoading() on specific images


Sounds

Add a custom sound and make it load with your interface:

Add this in your template (.tpl) file:

<audio id="audiosrc_<gamename>_<yoursoundname>" src="{GAMETHEMEURL}img/<gamename>_<yoursoundname>.mp3" preload="none" autobuffer></audio>
<audio id="audiosrc_o_<gamename>_<yoursoundname>" src="{GAMETHEMEURL}img/<gamename>_<yoursoundname>.ogg" preload="none" autobuffer></audio>

Note: this is a requirement to provide both a mp3 and a ogg file with the names <gamename>_<yoursoundname>[.ogg][.mp3].

Play the sound (from your .js file):

playSound('<gamename>_<yoursoundname>');   // do not add 'this.' - its a global function


Disable the standard "move" sound for this move (to replace it with your custom sound):

Add this to your notification handler:

this.disableNextMoveSound();

Note: it only disable the sound for the next move.

Title bar and states

Client states

Client states is a way to simulate the state transition but without actually going to server. It is usefull when you need to ask user multiple questions before you send things to server

setClientState(newState: string, args: object)

Example:

    this.setClientState("client_playerPicksLocation", {
                              descriptionmyturn : _("${you} must select location"),
                          });

For more information see BGA_Studio_Cookbook#Multi_Step_Interactions:_Select_Worker.2FPlace_Worker_-_Using_Client_States

restoreServerGameState() If you are in client state it will restore the current server state (cheap undo)

this.on_client_state Boolean indicating that we are in client state

Title bar

If you simply want to show something in title bar you can do it directly

    $('pagemaintitletext').innerHTML = text;

This however will not work with parameters and will not draw You in color, if you want to do proper args rendering use method below

removeActionButtons()

Removes all buttons from title bar

updatePageTitle()
This function allows to update the current page title and turn description according to the game state arguments. If the current game state description this.gamedatas.gamestate.descriptionmyturn is modified before calling this function it allows to update the turn description without changing state. This will handle arguments substitutions properly.

Note: this functional also will calls this.onUpdateActionButtons, if you want different buttons then state defaults, use method in example to replace them, if it becomes too clumsy use client states (see above)

Example from Terra Mystica:

onClickFavorTile: function( evt ) {
    ...
    if ( ... ) {
        this.gamedatas.gamestate.descriptionmyturn = _('Special action: ') + _('Advance 1 space	on a Cult track');
        this.updatePageTitle();
        this.removeActionButtons();
        this.addActionButton( ... );
         ...
        return;
    }
    ...

}

Other useful stuff

dojo.hitch

With dojo.hitch, you can create a callback function that will run with your game object context whatever happen.

Typical example: display a BGA confirmation dialog with a callback function created with dojo.hitch:

        this.confirmationDialog( _('Are you sure you want to make this?'), dojo.hitch( this, function() {
            this.ajaxcall( '/mygame/mygame/makeThis.html', { lock:true }, this, function( result ) {} );
        } ) );   

In the example above, using dojo.hitch, we ensure that the "this" object will be set when the callback is called.

NOTE: In modern JS there are lambdas that eliminate need for that, the example above will look like this

        this.confirmationDialog( _('Are you sure you want to make this?'), () => {
            this.ajaxcall( '/mygame/mygame/makeThis.html', { lock:true }, this, (result) => {} );
        } );   



onScreenWidthChange()
This function can be overridden in your game to manage some resizing on the client side when the browser window is resized. This function is also triggered at load time, so it can be used to adapt to the :viewport size at the start of the game too.



this.bRealtime
Return true if the game is in realtime. Note that having a distinct behavior in realtime and turn-based should be exceptional.
g_replayFrom
Global contains reply number in live game, it is set to undefined (i.e. not set) when it is not a reply mode, so consequentially the good check is typeof g_replayFrom != 'undefined' which returns true if the game is in replay mode during the game (the game is ongoing but the user clicked "reply from this move" in the log)
g_archive_mode
Returns true if the game is in archive mode after the game (the game has ended)


this.instantaneousMode
Returns true during replay/archive mode if animations should be skipped. Only needed if you are doing custom animations. (The BGA-provided animation functions like this.slideToObject() automatically handle instantaneous mode.)
Technically, when you click "replay from move #20", the system replays the game from the very beginning with moves 0 - 19 happening in instantaneous mode and moves 20+ happening in normal mode.
g_tutorialwritten
Returns an object like the below if the game is in tutorial mode, or undefined otherwise. Tutorial mode is a special case of archive mode where comments have been added to a previous game to teach new players the rules.
   {
       author: "91577332",
       id: "576",
       mode: "view"
       status: "alpha"
       version_override: null
       viewer_id: "84554161"
   }

getBgaEnvironment(): string

Returns "studio" for studio and "prod" for production environment (i.e. where games current runs). Only useful for debbugging hooks.

Note: alpha server is also "prod"